Thursday, June 5, 2014

And nothing turned on...

Monday, Memorial Day, we caved. It was 85°F in the house, a storm was rolling in, and we were about to leave the house. While this may not seem warm to some, we just survived one of the coldest winters that have probably happened during our lifetime in Minneapolis. Above freezing has been warm lately and up until just over a week ago, we were still down in the 30's overnight.

Then there are our floors, they are affected greatly by any water and leaving all of the windows in the house open when we know it is going to rain is too risky. We also have the dog to worry about... can't let him suffer. So, we decided to turn the central air on.

Nothing. Nothing happened. We tried everything. We flipped breakers, checked connections, googled for solutions. Absolutely nothing would turn on... not the furnace, not the air conditioner, not even the fan. We gave up, closed all the windows and moved Behr's extra kennel into the basement where it was nice and cool.

When we got home, we searched the internet some more. We figured it was very possible that the thermostat had gone bad. We figured out that it was probably about 10 years old. After removing the backup batteries and flipping the power off, it still stayed on... weird. But then once we flipped the power back on it went all electronically crazy (weird lines and sort of characters on the screen) before it finally went out.


At that point, it was just after 10pm at night. Everything was closed... except Target. We quickly ran over to Target and looked at what they had. They had 4 different Honeywell thermostats and the Nest. We ended getting the most expensive Honeywell with all the bells and whistles. We did go back and forth with the Nest, but the Honeywell one was on sale for under $200 (the Nest was over $50 more) and Honeywell has been around for a long time... Bill was concerned with the newness of the Nest and it's longevity in the market. Plus, regular programing works great for us, I'm not so sure that the "learning" feature of the Nest would work well for us.

The exact model is the Honeywell Wi-Fi Smart Thermostat RTH9580 Wi-Fi. I would link to Target, since that's where we got it but they don't have it online, so I linked to Amazon. In all honesty, Amazon will probably have the price if you're interested in picking one up. We did get a really good deal since it was on sale and we get the extra 5% off with the Target debit card.

We rushed home to do a quick install and hopefully have a cool night for a good night's rest (neither of us slept well the previous night because the house was so warm). We took down the old one, fairly easy.



Honeywell really emphasizes that you label your wires... we didn't right away and because ours were really straight forward, we could have done without but eventually labeled them.


Putting up the new "plate" was straight forward. Just make sure it's level really...


The wires get pulled through and put into their appropriate slots. At this point we were missing a normal wire, so we had to look up the work around on Honeywell's website, which was very clear.

We got it all put together and....


Nothing.

So frustrating. Except we realized that there was a wiring step we had to do at the furnace. We pulled the furnace apart to move around a wire for the work around for not having the one wire. Well, we found that we did in fact have the missing wire. So, we went back and pulled everything apart again... the wire we needed (along with a couple others in a bundle) were hidden in the wall.


We assembled everything again. And...


NOTHING AGAIN.

At this point we gave up. It was way past our bedtimes and I had to be up for work in 5 hours. I figured that worse case scenario, I would get ahold of our contractor the next day and see if he could have his HVAC guy come back out to the house.

During the night, Bill had a stroke of genius. I don't know how he thought of it or he maybe saw something in the furnace when were trying to get everything to work... Did you know that furnaces have fuses? Like the same ones that are in cars? They do...

Bill ran over to Home Depot and was able to pick up a box of a ton of them in multiple wattages because they didn't have an option to buy just one. I think it cost around $15, way better than a $200 thermostat.


The one on the left is the old one, you can see how in the middle there is a black dot where you can tell it's burned out. This little fuse was the whole problem. We discussed returning the thermostat, but we decided against it. It's actually really awesome...

This thermostat can connect to our wi-fi and grab the current outside temperature and humidity. It also has a bunch of features, like vacation mode and the ability to change it online from a computer or smart phone, that will be extremely helpful in the future. It even has the ability to change the background and font colors to match your home. I went with back for now so it helps it to blend in.


I do have to fix the wall now... There are holes to fill and some interesting ridges from round thermostats past. My goal right now is just to get it done before our annual 4th of July party...


Now you know... if your furnace/ac/fan aren't coming on, it could be a fuse!

2 comments:

  1. Hi--thanks for writing about what you're working on in your house. Found your blog because I googled something about basement drains in midcentury houses. We are trying to figure out if someone could have covered over a basement floor drain with linoleum tiles (the big probably asbestos kind!) We have some mysterious new water issues in our basement that we haven't had before. Anyway, I've enjoyed seeing how you're renovating. I was interested in how you handled the tile around your laundry room drain. I have no cover suggestions--we have a similar metal one, but ours is painted with the same battleship gray paint that the floor is painted. (Maybe you could paint yours to freshen it up?) I think your laundry area looks great!

    ReplyDelete
    Replies
    1. Thanks for 'stopping by' and reading! Sorry to hear about your water problem, those are never fun. Does your floor slope a lot around the drain you know you have? That would be a good thing to look for if there is a hidden drain somewhere else... Good luck!

      For the floor drain in our laundry, we're still trying to figure out how to make it look more finished, but I think we are going to stick with the original metal cover, mostly because it's nice and heavy (anything new would be a plastic). Paint is definitely an option we're thinking about.

      Thanks for the laundry room compliment! Having a real, finished room actually makes doing laundry somewhat enjoyable now!

      Delete